AUTOMATIC COMPLEX FOR METAL BENDING
TruBend Center 7030
AUTOMATIC METAL BENDING
"SibTekhMetall" LLC (Russia) designs and manufactures complex hull products from sheet metal, and also provide services for bending your workpieces.
Currently, an automatic complex for metal bending "TruBend Center" (from the German Concern "TRUMPF"), is installed at our production base. It allows us to manufacture large batches of products in a short time.
If you are not able to deal with your orders, we are ready to help you! Our specialists will develop a program for bending the parts you need as well as carry out the works on your order on our equipment.


THE BENEFITS OF WORKING WITH US:
- It is possible to manufacture large batches of products in a short time;
- Operator errors are eliminated since the complex operates in automatic mode. This means that all of the manufactured products will strictly correspond to the reference sample;
- With TruBend Center equipment, the cost of one bending operation will be almost the same or even slightly lower than the cost when using traditional equipment. But the operation speed will be much higher as well as the stability of product quality.
WE SUGGEST THE FOLLOWING PROCEDURE OF INTERACTION:
- You give us a drawing (3D model) of the product and inform about the desired production time and the number of products;
- Our specialists give an opinion on the possibility of manufacturing of your products, prepare software and make an experimental sample (prototype);
- Agreed on the cost of works and advance payment with you, we start manufacturing a batch of products.
The main parameters of "TruBend Center" metal are shown in the following table:

Max bend length | 3123 mm |
---|---|
Max width between bends | 400 |
Max length between bends | 145 – standard / 40 with ENW |
Sheet length"С" (min… max) | 3120 |
Sheet width "D" (min… max) | 1500 |
Max panel diagonal "E" | 3460 |
Max bend height "H" (1) | 220 |
Max re-bend "G" (1) | 50 |
Max thickness of the material | - |
Steel 410 N / mm2 | 3.0 mm |
Stainless steel 600 N / mm2 | 2.2 mm |
Aluminum 260 N / mm2 | 4.0 mm |
Min thickness of the material | 0.4 mm |
Bending types | - |
Bending angle | -135°… +135° |
Min shelf height for the first bend "F" | , max 40 mm with ENW |
Max number of bends per side | Unlimited |

Examples of products
made on the automatic metal bending complex "TRUMPF TruBend Centre 7030»






SEMIAUTOMATIC COMPLEX FOR METAL BENDING
TruBend 7050
SEMIAUTOMATIC METAL BENDING
Bending on a semiautomatic panel bending machine of the German Concern "TRUMPF" makes it possible to eliminate operator errors, as well as to get the highest precision of bent surfaces.